Video Input; Input Source Selection (Video, S-Video) - Eiki LC-WB200 Owner's Manual

Direct Operation
Choose VIDEO or S-VIDEO by pressing the
INPUT button on the top control, or the VIDEO or
the S-VIDEO button on the remote control.
Before using these buttons, correct input source
should be selected through menu operation as
described below.
Menu Operation
1
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼ buttons
to select Input and then press the Point ►
button or the SELECT button.
2
Use the Point ▲▼ buttons to select Video
or S-video, and then press the SELECT
button.
When video input signal is
Video
connected to the Video jack,
select Video.
When video input signal is
S-video
connected to the S-video jack,
select S-video.
Note:
When the Input search function is set to On 1 or
On 2 in the Auto setup function, the input signal
will be searched automatically (p.45).
36
Video Input
Input Source Selection (Video, S-video)
Top Control
Remote control
Video
INPUT button
VIDEO button
Video
S-VIDEO button
S-video