Main Menu - Eiki LC-WB200 Owner's Manual

Basic Operation
For detailed functions of each menu, see "Menu Tree" on pages 68-69.

Main Menu

①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
① Input
Used to select an input source from Computer 1, Computer 2, HDMI, Video or S-video. (pp.27,
37)
② PC adjust
Select Auto PC adj., Fine sync, Total dots, Horizontal, Vertical, Current mode, Clamp, Display
area H, Display area V, Reset, Mode free and Store to adjust the parameters to match with the
PC input signal format. (pp.29-31)
③ Image select
For both of computer and Video sources, used to select an image mode from among Dynamic,
Standard, Real, Cinema, Blackboard(Green), Colorboard and Image 1-4. (pp.32, 39)
④ Image adjust
For Computer source, used to adjust computer image [Contrast, Brightness, Color temp .,
White balance (R/G/B), Sharpness, Gamma, Reset and Store]. (p.33)
For VIDEO source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp .,
White balance (R/G/B), Sharpness, Gamma, Noise reduction, Progressive, Reset and Store].
(pp.40-41)
⑤ Screen
For Computer source, used to adjust size of the image [ Normal, Full, Wide(16:9), Zoom, True,
Custom, Custom adj., Digital zoom +/– , Keystone, Ceiling, Rear, Screen aspect and Reset] .
(pp.34-35)
For VIDEO source, used to set size of image [Normal, Full, Wide(16:9), Zoom, Natural wide,
Custom, Custom adj., Keystone, Ceiling, Rear, Screen aspect and Reset] . (pp.42-43)
⑥ Sound
Used to adjust the volume or mute the sound or set configurations to the MIC functions (p.24).
⑦ Setting
Used to set the projector's operating configurations. (pp.44-58)
⑧ Information
Display the input source information. (p.59)
⑨ Network
See owner's manual of "Network Set-up and Operation".
⑩ Guide
The key operation is displayed.
22
Main Menu
Sub-Menu