Eiki LC-WB200 Owner's Manual page 31

Reset
To reset the adjusted data, select Reset and
press the SELECT button. A confirmation box
appears and then select Yes. All adjustments
will return to their previous figures.
Mode free
To clear the stored data, select Mode free and
then press the Point ► button or the SELECT
button. Move the highlight to the Mode that
you want to clear and then press the SELECT
button.
Store
To store the adjusted data, select Store and
then press the Point ► button or the SELECT
button. Move the highlight to one of the Mode
1 to 10 in which you want to store, and then
press the SELECT button.
Note:
• Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected in the
PC System Menu (p.28).
• When input computer signal to the projector, PC adjust will become available.
Mode free
Values of Total dots, Horizontal,
Vertical, Display area H, and Display
area V.
Store
Press the MENU
button to close this
dialog box.
Computer Input
This Mode has stored
parameters.
Vacant
Press the SELECT
button to store the data.
31