Set Mode; I Set Mode Programming; I Set Mode Items - Icom IC-M21 Instruction Manual

6

SET MODE

I SET mode programming

SET mode is used to change the conditions of 11 transceiver
functions: beep tone, scan type, scan resure timer, auto scan,
monitor action, automatic backlighting, LCD contrast, auto
power save, self check, battery voltage and S/RF meter.
q Turn power OFF.
w While pushing [SQL•
pushing [SQL•
MONI
e Release [SQL•
MONI
r Push
to select the desired condition of the item.
[Y]/[Z]
t Push [SQL•
MONI
y To exit SET mode, turn the power OFF, then ON again, or
push [16• ].
C
SET MODE CONSTRUCTION
Battery
voltage
Self
check
Auto
power save
13
], turn power ON and continue
MONI
] until "bP" appears.
].
] to select the desired item, if necessary.
S/RF Scan
Beep tone
meter type
Starting item
MONI
Push
SQL
Automatic
LCD
backlighting
contrast

I SET mode items

D Beep tone
You can select silent operation by turning beep tones OFF or
you can have confirmation beeps sound at the push of a
switch by turning beep tones ON.
• AUTO (At): Beep tone is linked with volume tone.
• 1–10: Beep tone scale is set from 1–10 scale (Max. is 10).
D Priority scan function
The transceiver has 2 scan types. Normal scan and priority
scan. Normal scan searches all tag channels in the selected
Scan resume
timer
channel group. Priority scan searches all tag channels in se-
quence while monitoring Channel 16.
Auto
scan
Monitor
action
"bP"
Beep tone AUTO (default)
"Pr"
Priority scan (default)