POSIFLEX LM-6601 User Manual
POSIFLEX LM-6601 User Manual

POSIFLEX LM-6601 User Manual

12.1” 2nd lcd monitor

Advertisement

Quick Links

LM-6601
nd
12.1" 2
LCD Monitor
User's Manual
I.
FEATURES
• 12.1" LCD monitor with tilt adjust for 2
POS system
• Spill proof and easy maintenance structure allowing easy cleaning
• High quality TFT LCD panel with scaling up function for full screen
display
• Resolution: 1024 x 768
• Color depth: 262,144 colors
• Super VGA interface
• Powered through interface cable

FCC NOTICE

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions manual, may cause interference to radio communications. It has been tested and found to comply with limits
for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection
against interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause
interference in which case the user at his own expense will be required to take whatever measures to correct the interference.
WARRANTY LIMITS
Warranty will terminate automatically when the machine is opened by any person other than the authorized
technicians. The user should consult his/her dealer for the problem happened. Warranty voids if the user does not follow the
instructions in application of this merchandise. The manufacturer is by no means responsible for any damage or hazard caused by
improper application.

ABOUT THIS MANUAL

This manual assists the user to utilize the LCD Monitor LM-6601. Thos series provides adjustable robust
construction for 12.1" LCD display with maximum resolution of 1024 x 768 pixels and 262,144 colors. It is powered by the host FT
series system through the interface cable.
The manufacturer of the LM-6601 series heartily apologizes to the user for reserving the right to change or to modify
this manual without notice due to the rapid and constant progress and improvement on science and technology. The user may
always obtain the most up to date information through any of our web sites: http://www.posiflex.com, http://www.posiflex.com.tw,
http://www.posiflexusa.com.
TRADE MARKS AND SERVICE MARKS
POSIFLEX is a registered trademark of Posiflex Technologies, Inc..
Other brand and product names are trademarks and registered trademarks and service marks of their respective owners.
P/N: 19050903010
Rev. Original
© Copyright Posiflex Technologies, Inc. 2008
nd
display attached to FT series
Part 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LM-6601 and is the answer not in the manual?

Questions and answers

Summary of Contents for POSIFLEX LM-6601

  • Page 1: About This Manual

    The manufacturer of the LM-6601 series heartily apologizes to the user for reserving the right to change or to modify this manual without notice due to the rapid and constant progress and improvement on science and technology. The user may always obtain the most up to date information through any of our web sites: http://www.posiflex.com, http://www.posiflex.com.tw,...
  • Page 2: Carton Contents

    II. CARTON CONTENTS 1. LCD Monitor panel unit (Main unit assembled with Stand) 2. L shape support bracket for LM-6601 onto FT system 3. User’s Manual 4. VGA Cable: 21863241710 5. Fixing Screws:10684038123 (#6-32 12L) x 2 III. PARTS IDENTIFICATION...
  • Page 3: Hardware Installation

    Cable Connection 5. Connect the VGA cable that has both 3 x 5 D sub male ends to VGA port at rear of LM-6601 and the VGA port of host system. Screw in the cable to connectors at both ends.
  • Page 4 VI. APPLICATION TILT ANGLE ADJUST The tilt angle of LM-6601 can be easily adjusted against a set of friction hinge. Just turn the panel at will. Power & OSD buttons “OSD” button: To enter OSD setup menu, or to perform the function selected in OSD operation.
  • Page 5 “BRIGHTNESS / CONTRAST ADJUST SUBMENU”: There are 3 icons in this submenu: . Press “OSD” button to select item or return to main menu. Press “NEXT” button to select among brightness, contrast and exit. “BRIGHTNESS ADJUST”: When this item is selected, there will be only the brightness icon with an adjustment indication bar under it between the main menu area and the video signal mode.
  • Page 6 “SEPARATE COLOR ADJUST”: When this item is selected, there will be 3 adjustment indication bars between the main menu area and the video signal mode. Press “NEXT” button to select among the 3 colors Red, Green and Blue respectively. Press “+” button to intensify that color. Press “-” to reduce.
  • Page 7 adjust submenu”. “HORIZONTAL POSITION”: When this item is selected, there will be only the horizontal position icon with an adjustment indication bar under it between the main menu area and the video signal mode. Press “+” or “-” button to shift the screen display to right or left. Press “OSD”...
  • Page 8 “RESET TO DEFAULT”: Pressing “OSD” button on this icon will set all parameters back to the status when the monitor left factory. “SMOOTHNESS / SHARPNESS ADJUST”: When this item is selected, there will be only the smoothness / sharpness adjust icon with an adjustment indication bar under it between the main menu area and the video signal mode.
  • Page 9: Supported Display Modes

    VII. SUPPORTED DISPLAY MODES For video signals beyond the supported display modes, there will be a message “Out Of Range” on middle of screen. Maximum supported color depth is 18 bits or 262,144 colors. Supported display modes are as in the table: Display Resolution Refresh Rate (Hz) Horizontal Frequency (KHz) 640*400...
  • Page 10 ĵ§i¨Ï¥ÎªÌ T31454 ³o¬O¥ÒÃþªº¸ê°T²£«~ ¡A ¦b©~¦íªºÀô ¹Ò¤¤¨Ï¥Î®É ¡A ¥i¯à·|³y¦¨®gÀW¤z ÂZ ¡A ¦b³oºØ±¡ªp¤U ¡A ¨Ï¥ÎªÌ·|³Q-n ¨D±Ä¨ú¬Y¨Ç¾A·íªº¹ïµ¦ ¡C Part 10...

Table of Contents