POSIFLEX LM-6207 User Manual

POSIFLEX LM-6207 User Manual

7” usb lcd monitor

Advertisement

LM – 6207-6307-6407-6507-6607
7" USB LCD Monitor
User's Manual
FCC Notes:
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions
manual, may cause interference to radio communications. It has been tested and found
to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of
FCC Rules, which are designed to provide reasonable protection against interference
when operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his own expense
will be required to take whatever measures to correct the interference.
Warranty Limits:
Warranty terminates automatically when any person other than the authorized
technicians opens the machine. The user should consult his/her dealer for the problem
happened. Warranty voids if the user does not follow the instructions in application of
this merchandise. The manufacturer is by no means responsible for any damage or
hazard caused by improper application.
About This Manual:
Posiflex has made every effort for the accuracy of the content in this manual. However,
Posiflex will assume no liability for any technical inaccuracies or editorial or other
errors or omissions contained herein, nor for direct, indirect, incidental, consequential
or otherwise damages, including without limitation loss of data or profits, resulting
from the furnishing, performance, or use of this material. This information is provided
"as is" and Posiflex Technology, Inc. expressly disclaims any warranties, expressed,
implied or statutory, including without limitation implied warranties of merchantability
or fitness for particular purpose, good title and against infringement. The information in
this manual contains only essential hardware concerns for general user and is subject to
change without notice. Posiflex reserves the right to alter product designs, layouts or
drivers without notification. The system integrator shall provide applicative notices and
arrangement for special options utilizing this product. The user may find the most up to
date information of the hardware from web sites: http://www.posiflex.com or
http://www.posiflex.com.tw
All data should be backed-up prior to the installation of any drive unit or storage
peripheral. Posiflex will not be responsible for any loss of data resulting from the use,
disuse or misuse of this or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, or otherwise, without prior express written consent from
Posiflex Inc. the publisher of this documentation.
© Copyright Posiflex Technology, Inc. 2013
All brand and product names and trademarks are the property of their respective holders.
18340900010
P/N:
Rev. : Original
Part 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LM-6207 and is the answer not in the manual?

Questions and answers

Summary of Contents for POSIFLEX LM-6207

  • Page 1 About This Manual: Posiflex has made every effort for the accuracy of the content in this manual. However, Posiflex will assume no liability for any technical inaccuracies or editorial or other errors or omissions contained herein, nor for direct, indirect, incidental, consequential or otherwise damages, including without limitation loss of data or profits, resulting from the furnishing, performance, or use of this material.
  • Page 2: Brief Introduction

    The LM-6x07 7” USB LCD monitor product series are typical of small-sized LCD peripheral. The LM-6x07 can be irreplaceable for a conventional LM (not required for AP modification). The LM-6207 is a stand alone pole customer display designed for discrete POS applications, The LM-6307 is a back cover mount customer display option designed for KS series POS terminals.
  • Page 3: Physical Installation

    PnP function, connect the attached USB 2.0 type A signal cable to the USB port in the host system. LM-6207 Front View: The LM-6207 is a stand alone pole customer display as illustrated below. LM-6307 Installation: The LM-6307 can be attached to the POS upper rear base. Fasten the 4 screws on the upper rear base of KS series machine as illustrated in No1.
  • Page 4 LM-6407 Installation: The LM-6407 can be attached to the POS rear corner of bottom plate of Posiflex Gen 5 base. Please aim the 2 holes to the arrowed screw which shows in the below No1. picture. Then use the 2 attached Bing head screws to fix the metal base plate of the LM to the bottom of Gen 5th series base as circled in the No 2.
  • Page 5: Application Guides

    5% to 90%, non-condensing WARNING: If the user opens the pole display housing to make any modification, all the product warranty will be voided. NOTE: Please refer to Posiflex Product Information DVD or visit our web http://www/posiflex.com.tw for further information needed. T31454 警...

This manual is also suitable for:

Lm-6307Lm-6407Lm-6507Lm-6607

Table of Contents