Placing A Cd-Rom Disc In A Drive - HP 748 Owner's Manual

Figure 7-3
Loading a CD-ROM Disc
This CD-ROM drive has an automatic loading/ejecting feature. To load a
disc in the CD-ROM drive, follow these steps:

Placing a CD-ROM Disc in a Drive

Check that the workstation is powered on.
1
To open the disc tray, press and release the load/eject button on the CD-
2
ROM drive.
Be sure the disc holders are slid away from the disc.
3
Hold the disc by the edges with the label side up and place it in the disc
4
tray as shown in
Figure 7-3
To close the disc tray, push the front of the disc tray gently towards the
5
drive until it closes by itself.
Using Mass Storage Devices
Operating the CD-ROM Drive
.
7-7