For More Information - HP 748 Owner's Manual

4 Refer to your VME card installation manual, and then set any hardware
configurations that may be required for your application.
5 Slide the VME accessory card into the slot, and then tighten its screws.
6 Plug in the power cords, and then turn on your workstation and boot the
operating system.

For More Information

For detailed procedures for configuring VME cards and associated drivers,
see HP-UX 9.05 VME Configuration and Driver Development Guide or
VME Services for HP-UX 10.
Installing VME Accessory Card Hardware
VME Card Installation
3-7