Board Computer Configurations; Conversion Cables; Conversions To Standard Cabling - HP 748 Owner's Manual

Table 1-1
Cable Number
HP A4300A
HP A4301A
HP A4302A
HP A4303A
HP A4304A
HP A4305A
HP A4223A
HP A4167A

Board Computer Configurations

Memory, interface, graphics, and operating system configurations depend on
the processor you selected when ordering your Model 748. Please refer to
the owner's guide for your processor for memory configuration details.

Conversion Cables

The high-density I/O connectors for the board computers require conver-
sions to standard cabling. These cables are 75 cm (30 in.) long. See Table 1-
1 for details.

Conversions to Standard Cabling

Description
HP Parallel: High Density 25-pin to standard 25-pin (female)
RS-232C: High Density 9-pin to standard 9-pin (male)
Audio: High Density 9-pin to bare wires
LAN: High Density 15-pin to 15-pin AUI
Video for Model 743: High Density 15-pin to standard 15-pin (female)
Video for Model 743/744 with EVC monitors: High Density 15-pin to EVC
35-pin connector (female)
Video for Model 744: High Density 15-pin to standard 15-pin (female)
Video for GSC card: Std. 15-pin to EVC 35-pin connector (female)
In addition, standard cables are also available and may be required.
Product Description
Board Computer Configurations
1-7