4-4
EISA Card Installation
Hardware Installation
Hardware Installation
Tools Required
You'll need the following items to access the EISA cards in the Model 748
• Medium flat-tipped screwdriver.
• Static-free work area.
Procedure
1 Stop any application programs, and then shut down your workstation.
2 Turn the workstation off, and unplug the power cord(s).
3 Using a flat-tipped screwdriver, unscrew the captive screws inside the
EISA module handles five to seven turns (until each screw pops out).
4 Grasp the EISA module handles and pull the EISA module out of the chas-
sis, as shown in Figure 4-1.