Archiving Data; Writing To A Data Cassette - HP 748 Owner's Manual

7-24
Using Mass Storage Devices
Operating the DDS Tape Drive
2 The System Administration Manager window opens. Double-click on
Peripheral Devices ->.
3 The Peripheral Devices window opens. Double-click on
Tape Drives ->.
The Tape Drives window opens.
4
In the list of tape drives, click on the desired tape drive to select it.
5
From the Actions menu, click on
6
A window opens with a list of the device files for the selected tape drive
with an explanation of each one.

Archiving Data

This section describes how to transfer data to and from a DDS-format data
cassette (saving and restoring) using the HP-UX tar command and your tape
drive's device file.
The tar command allows you to save files to a data cassette, restore files
from a data cassette to your system, or list the files on your data cassette.

Writing to a Data Cassette

Use the following instructions to save files to a data cassette:
Check that the write-protect tab on the data cassette is in the write posi-
1
tion.
Load the data cassette into the tape drive.
2
3 In a terminal window, enter the following command line to write to the
tape:
tar -cvf /dev/rmt/devicefile pathname Enter
where devicefile is one of the device files listed from sam and pathname
is the pathname of the file or directory containing files that you want to
write to the tape. To use the data compression mode, use one of the
device file names that sam listed as supporting compression.
Show Device Files.