Hardware Installation - HP 748 Owner's Manual

WARNING:
CAUTION:

Hardware Installation

1 Stop any application programs, then shut down your workstation.
2 Turn the workstation off, and unplug the power cord(s).
To avoid electrical shock, make sure you unplug the power cable from the wall
outlet and the system unit before proceeding any further.
The internal components of your workstation are susceptible to mechanical
and electrostatic shock. To prevent such damage from occurring, observe
the following precautions during the installation procedure.
• Stand on a static-free mat
• Wear a static-grounding wrist strap to ensure that any accumulated
electrostatic charge discharges from your body to ground. Attach the
static-grounding wrist strap by following the instructions on the pack-
age that contains the strap. Be sure to attach one end of the strap to the
system chassis.
• Handle workstation and upgrade kit components carefully to prevent
damage from mechanical shock.
PCI Card Installation
Hardware Installation
5-3