4.4.2 LACP Configuration
This page is used to configure the LACP Configruation. The LACP Configuration screen in
The page includes the following fields:
Object
•
LACP Enable
•
System Priority
Buttons
: Click to apply changes.
Figure 4-4-4 LACP Setting page screenshot
Description
Enable or disable the LACP function. The default value is "Disabled".
A value which is used to identify the active LACP. The Managed Switch with the
lowest value has the highest priority and is selected as the active LACP peer of
the trunk group.
Figure 4-4-5 LACP Information page screenshot
82
User's Manual of WGSW-28040 / 28040P
Figure 4-4-4 & Figure 4-4-5
appears.