The page includes the following fields:
Object
• No.
• Community
• Access Type
• Delete
4.2.8.4 Trap
Configure SNMP trap on this page. The SNMP Trap Configuration screen in
The page includes the following fields:
Object
•
IP Address
•
Community
Buttons
: Click to apply changes.
Description
This is the number for community entry.
Display the current community type.
Display the current access type.
Click to delete the community entry.
Figure 4-2-23 Trap Receiver Setting page screenshot
Description
Indicates the SNMP trap destination address.
Indicates the community access string when send SNMP trap packet. The
allowed string length is 0 to 255, and the allowed content is the ASCII characters
from 33 to 126.
Figure 4-2-24 Trap Receiver Status page screenshot
59
User's Manual of WGSW-28040 / 28040P
Figure 4-2-23 & Figure 4-2-24
appears.