Led Indications - Planet WGSW-28040 User Manual

■ ResetButton
At the left of front panel, the reset button is designed for reboot the Managed Switch without turn off and on the power. The
following is the summary table of Reset button
Reset Button Pressed and Released
< 5 sec: System reboot
> 5 sec: Factory Default

2.1.2 LED Indications

The front panel LEDs indicates instant status of port links, data activity and system power; helps monitor and troubleshoot when
needed. Figure 2-3 & Figure 2-4
WGSW-28040 LED indication
■ System
LED Color
PWR
Green
SYS
Green
■ 10/100/1000Base-T interfaces
LED Color
LNK/ACT Green
1000 Orange
functions:
Function
Reboot the Managed Switch
Reset the Managed Switch to Factory Default configuration.
The Managed Switch will then reboot and load the default
settings as below:
。
。
。
。
。
shows the LED indications of these Managed Switch.
Figure 2-3 WGSW-28040 LED panel
Lights to indicate that the Switch has power.
Lights to indicate the system is working.
To indicate the link through that port is successfully established.
Lights:
To indicate that the switch is actively sending or receiving data over that port.
Blink:
indicate that the port is operating at 1000Mbps.
Lights:
User's Manual of WGSW-28040 / 28040P
Default Username: admin
Default Password: admin
Default IP address: 192.168.0.100
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.254
Function
Function
23