Example:
To set dot1x re-authentication period:
WGSW-28040(config)# dot1x reauthperiod 30
Dot1x Port
Description:
Set dot1x port configuration
Syntax:
dot1x port <port_list> <admin-status|control> <enable|disable|authorized|unauthorized>
Parameters:
: Port list or 'all'
port_list
admin-status : Administration status
: Port authentication control
control
: Enable authorization
enable
: Disable authorization
disable
: Force authorized
authorized
unauthorized : Force unauthorized
Example:
To set dot1x port configuration:
WGSW-28040(config)# dot1x port 1 admin-status enable
6.3.11 RADIUS Server Command
RADIUS Host Server
Description:
Set IP address of the remote radius server host
Syntax:
radius-server host <A.B.C.D> auth-port <port_number>
Parameters:
: IP Address format is A.B.C.D where (A/B/C/D = 0 ~ 254)
A.B.C.D
Port_number : 0~65535
Example:
To set IP address of the remote radius server host:
WGSW-28040(config)# radius-server host 192.168.0.20 auth-port 1812
User's Manual of WGSW-28040 / 28040P
234