Planet WGSW-28040 User Manual page 154

The page includes the following fields:
Object
• 802.1X
• RADIUS Server IP
• Server Port
(1024-65535)
• Shared Key
• (max. 30 characters)
• Retype Shared Key
• Reauthentication State
• Reauthentication
Period (30~65535 sec)
Buttons
: Click to apply changes.
Figure 4-9-9 802.1X Setting page screenshot
Description
Indicates if NAS is globally enabled or disabled on the switch. If globally disabled,
all ports are allowed forwarding of frames.
The IP address or hostname of the RADIUS Authentication Server. IP address is
expressed in dotted decimal notation.
The UDP port to use on the RADIUS Authentication Server. If the port is set to 0
(zero), the default port (1812) is used on the RADIUS Authentication Server.
The shared key - up to 30 characters long - shared between the RADIUS
Authentication Server and the switch.
Please enter the shared key here again to confirm.
If checked, successfully authenticated supplicants/clients are reauthenticated
after the interval specified by the Reauthentication Period. Reauthentication for
802.1X-enabled ports can be used to detect if a new device is plugged into a
switch port or if a supplicant is no longer attached.
Determines the period, in seconds, after which a connected client must be
reauthenticated. This is only active if the Reauthentication Enabled checkbox is
checked. Valid values are in the range 30 to 65535 seconds.
154
User's Manual of WGSW-28040 / 28040P