Menus Example 1 - Tray 1 Transparencies - Oki C9850hdn Advanced User's Manual

ITEM
Paper Clr
Setting
Trans. Bk
Setting
Trans. Clr
Setting
SMR Setting
BG Setting
Drum
Cleaning
Hex Dump
M 1 –
ENUS EXAMPLE TRAY
To print on transparencies (accommodated in Tray1):
1. Ensure that the display panel indicates that the printer unit is ready to print.
2. Enter menu mode by pressing either the Up-arrow or Down-arrow button and
press them repeatedly until the Menus menu is highlighted.
3. Press the Enter button to select this menu.
4. Press the Up-arrow or Down-arrow buttons repeatedly until Tray Configuration is
highlighted.
5. Press the Enter button to select this Item.
6. Press the Up-arrow or Down-arrow buttons repeatedly until Tray1 Config is
highlighted.
7. Press the Enter button to select this Item.
8. Press the Up-arrow or Down-arrow buttons repeatedly until MediaType is
highlighted.
9. Press the Enter button to select this Item.
VALUE
0
+1 – +2
-2 – -1
0
+1 – +2
-2 – -1
0
+1 – +2
-2 – -1
0
+1 – +3
-3 – -1
0
+1 – +3
-3 – -1
OFF
ON
Execute
1
TRANSPARENCIES
Appendix B – Menu system (printer unit) > 131
DESCRIPTION
Used for micro adjustment when very
visible faded print results or light
specks (or streaks) result when
printing in Plain Paper/Color setting.
Decrease the value if light specks (or
streaks) or snow flake like printing
results in high density print areas.
As for Paper Black Setting above.
As for Paper Color Setting above.
To correct variations in print results
caused by temperature/humidity
conditions and difference in print
density/frequency.
Change the setting when print quality
is uneven.
To correct variations in print results
caused by temperature/humility
conditions and difference in print
density/frequency.
Change the setting when background
is dark.
Note: Auto BG adjust mode within the
Calibration menu must be set to Off.
See page 142.
Set to produce idling of a drum before
printing in order to reduce horizontal
white lines. This shortens image drum
life.
Prints out the data received from the
host PC in hexadecimal code.