Tray Alignment; Calibration - Oki C9850hdn Advanced User's Manual

T
RAY ALIGNMENT
ITEM
Exit Tray
Alignment
Align Trays
Restore Default
C
ALIBRATION
ITEM
Exit Calibration
Auto Density Mode
Auto BG Adjust
Mode
Adjust Density
Adjust Registration
Set Up Calibration
VALUE
-
Execute
Execute
VALUE OR VALUE
SUBMENU
ENTRY
-
On -
Off
Off -
-1
0
+1
+2
Adjust Yes
Density? No
Adjust Yes
Registration? No

Calibration

Standard
Mode Expert
Page Layout Color
ColPage
Single
Pattern
Tray Auto Select
Bypass
Appendix B – Menu system (printer unit) > 142
DESCRIPTION
Exit the menu without
performing the tray alignment
operation.
DESCRIPTION
Sets whether density adjustment
and TRC compensation is
automatically performed.
ON: density adjustment is
automatically run under the
printer specified conditions and
reflected in the TRC
compensation.
OFF: the printer does not carry
out density adjustments
automatically.
Prevents dirty print backgrounds
caused by unstable toner-
charging conditions. The print
density sensor detects the toner
electric potentials and
automatically adjusts supply
voltage (SB) and charging
voltage (CH). The menu does
not appear when auto density
mode is set to OFF.
When Yes is selected, the printer
carries out density compensation
immediately and reflects it in
TRC compensation. Density
adjustment must be carried out
when the printer is idling.
When Yes is selected, the printer
carries out registration
adjustment automatically.
Registration adjustment must be
carried out when the printer is
idling.