Menus Example 1 - Tray 1 Transparencies - Oki C9800 GA User Manual
Hide thumbs
Also See for C9800 GA:
- User manual (116 pages) ,
- Configuration manual (170 pages) ,
- User manual (204 pages)
Table of Contents
Advertisement
M
1 – T
ENUS EXAMPLE
To print on transparencies (accommodated in Tray1):
1.
Ensure that the LCD panel indicates that the printer is
ready to print.
2.
Enter menu mode by pressing either the Up-arrow or
Down-arrow button and press them repeatedly until the
Menus menu is highlighted.
3.
Press the Enter button to select this menu.
4.
Press the Up-arrow or Down-arrow buttons repeatedly
until Tray Configuration is highlighted.
5.
Press the Enter button to select this Item.
6.
Press the Up-arrow or Down-arrow buttons repeatedly
until Tray1 Config is highlighted.
7.
Press the Enter button to select this Item.
8.
Press the Up-arrow or Down-arrow buttons repeatedly
until MediaType is highlighted.
9.
Press the Enter button to select this Item.
10.
Press the Up-arrow or Down-arrow buttons repeatedly
to move through the range of media types until
Transparency is highlighted.
11.
Press the Enter button to select this value.
12.
Check that an asterisk (*) appears beside Transparency.
13.
Press the Online button to exit menu mode and return to
the ready to print status.
1
RAY
TRANSPARENCIES
C9800 User's Guide> 124
Advertisement
Table of Contents
