Oki C9850hdn Advanced User's Manual page 104

Select from the following features as required and then press the OK button:
NO. FEATURE
1 Original Size
2 Original Type
3 Job Build
4 Image Quality
5 Edge/Center
Erase
6 Compression
Level
NOTE
If you specify Auto for Original Size, the MFP automatically selects the paper
size to match the original document. However, depending on the document
conditions (for example, if the background density is high), document sizes
may not be detected automatically. In this case, specify the document size
manually.
5. Place the document to be scanned on the scanner unit glass or ADF.
6. Press the START button.
OPTIONS DESCRIPTION
Auto, 5.5x8.5, Allows you to select the scanned
5.5x8.5R, 8.5x11, document size.
8.5x11R, 8.5x13,
8.5x14, 11x17, A5,
A5R, A4, A4R, A3,
B5, B5R, B4
Mixed, Text, Photo Allows you to specify the type of images
on the document. This allows automatic
(pre-set) optimization of image quality
settings.
OFF / ON Allows you to construct a single copy job
or scan job from multiple individual sheets
or originals.
Default Allows you to select brightness level and
contrast level.
Lighter / Darker
-5 to +5 by 1
Contrast
-5 to +5 by 1
Allows you to block out the colour
Background Removal background of the image (assuming
OFF, 1 to 10 by 1 document has a colour background) - such
that the background colour is not
displayed.
Default Allows you to block out the peripheral
areas of the document where spurious
Edge
shadows and borders may arise when
Metric: 0-50mm in
scanning with the document cover open
1mm increments
(such as with books and magazines) or for
Inch: 0" – 2.0" in
other purposes.
0.1" increments
Center Allows you to block out a centred
rectangular area of the document where
Metric: 0-50mm in
spurious shadows and borders may arise
1mm increments
when scanning bound originals (books,
Inch: 0" – 2.0" in
magazines) with the centre spread layout.
0.1" increments
Default Allows you to select compression level.
OFF, 1 to 10 by 1
Scanning – general > 104