Oki C9850hdn Advanced User's Manual page 130

ITEM VALUE
Print Position X Adjust
Adjust
Y Adjust
Duplex X
Adjust
Duplex Y
Adjust
xxxx 0
Darkness +1 – +3
-4 – -1
xxxx Reg. 0
Adjust +1 – +3
-3 – -1
Paper Bk 0
Setting +1 – +2
-2 – -1
Appendix B – Menu system (printer unit) > 130
DESCRIPTION
0.00 Adjusts the position of the whole
+0.25 – printing image (0.25 mm, 0.01 in
+2.00 interval) perpendicular to the
-2.00 – -0.25 direction of paper movement (i.e.
horizontally).
mm
0.00
+0.01 –
+0.08
-0.08 – -0.01
in
0.00 Adjusts the position of the whole
+0.25 – printing image (0.25 mm, 0.01 in
+2.00 interval) parallel to the direction of
-2.00 – -0.25 paper movement (i.e. vertically).
mm
0.00
+0.01 –
+0.08
-0.08 – -0.01
in
0.00 During the flip-side printing of duplex
+0.25 – printing, adjusts the location of the
+2.00 whole printing image (0.25 mm,
-2.00 – -0.25 0.01in interval) perpendicular to the
mm direction of paper movement (i.e.
horizontally).
0.00
+0.01 –
+0.08
-0.08 –
-0.01in
0.00 During the flip-side printing of duplex
+0.25 – printing, adjusts the location of the
+2.00 -2.00 whole printing image (0.25 mm, 0.01
– -0.25 mm in interval) parallel to the direction of
paper movement (i.e. vertically).
0.00
+0.01 –
+0.08
-0.08 – -0.01
in
Adjusts the xxxx engine density
where xxxx is one of Cyan, Magenta,
Yellow, Black. Darkest value is +3.
Makes fine adjustment to image
registration in xxxx against Black in
the horizontal direction, where xxxx is
one of Cyan, Magenta, Yellow.
If the paper movement direction is
upward, a value set on the plus side,
means the image relatively moves
downward.
Used for micro adjustment when very
visible faded print results or light
specks (or streaks) result when
printing in Plain Paper/Black setting.
Decrease the value if light specks (or
streaks) or snow flake like printing
results in high density print areas.