W
ATERMARKS
NOTE
This feature is not available with the PCL 6 driver.
A watermark is typically faint text that is superimposed on a printed document. This can
be used to indicate that the document is "Draft", or perhaps "Confidential".
How to create a new watermark
1.
On the Job Options tab click Watermarks....
2.
Click New... and enter the text for your watermark.
3.
Adjust your watermark's size, angle, font, colour, position and border (trim) if
required.
4.
Click OK to accept your changes. The new watermark is now in the Watermark list.
How to choose a previously created watermark
1.
On the Job Options tab click Watermarks....
2.
On the Watermarks window, select the watermark in the list. A preview of the
watermark is shown.
3.
Select the First page only checkbox if required.
4.
Click OK.
How to edit an existing watermark
1.
On the Job Options tab click Watermarks....
2.
Select the watermark you want to edit, then click Edit....
3.
Modify the text for your watermark.
4.
Modify the attributes (font, colour, size, angle) for your watermark and click OK to
accept your changes.
Printing from Windows – PCL > 31