Advertisement
A. Crosscut Table-Provides a wide, stable platform for
supporting full-size panels during crosscutting
operations.
B. Flip Stops-Used for quick measurements for
crosscutting.
C. Crosscut Fence-Used during crosscutting
operations. Features a scale and multiple flip-style
stopblocks for precise, repeatable crosscutting
operations.
D. Roller-Used for supporting full-size panels during
crosscutting operations.
E. Sliding Panel-Conveniently glides the work-piece
through the blade with effortless precision and ease.
F. Blade Guard-Fully-adjustable blade guard allows
high visibility of the cutting operation while
maintaining maximum protection around the saw
blade.
G. Rear extension table
H. Power Switch-Start/stops the machine and has
emergency stop function.
J. Blade Elevation Hand-wheel-Adjust the height of
the main saw blade.
U. Riving Knife-Maintains kerf during cutting
operations. This function is crucial to preventing
kickback caused by the kerf closing behind the
blade.
V. Main Blade-Performs the cutting operations.
W. Scoring Blade-Small cutting blade that rotates
opposite the main saw blade. The blade scores the
workpiece before the actual cutting operation is
performed; thus, preventing tear-out in laminate
materials. The scoring blade is adjustable forward
and backward, up and down, and in thickness of kerf.
K. Blade Angle Hand-wheel-Adjust the angle of the
saw blades.
L. Mitre Gauge-This gauge aligns the wood for a
cross-cut.
M. Rip Fence-Fully adjustable with fine adjustments.
Fence face can be positioned for standard cutting
operations, or in the lower position for blade guard
clearance during narrow ripping operations.
N. Fence Assembly Lock Down lever-Secures the
fence assembly into position along the fence rail.
P. Fine-Adjust Knob-Precisely adjusts the fence.
Q. Rip Fence Rail-Provides the support for rip fence.
R. Support Leg-Provides the support for the extension
table.
S. Main Blade Angle Lock Knob-Secures the angle of
main blade.
T. Hold Down w/Mitre Gauge-Holds the work-piece for
sliding or mitre cutting.
1. Scoring Blade Alignment Screw-Adjusts the
lateral movement of the scoring blade.
2. Scoring Blade Lock Screw-Locks the scoring blade
after adjusted.
3. Scoring Blade Elevation Screw-Adjusts the height
of the scoring blade.
Advertisement
