Advertisement
Miter Cutting
The cross cut table built two scales for forward and rear
mount fence to perform mitre cut.
Also the sliding panel built a scale for hold down to
perform mitre cut.
Lastly, this machine has the capacity of mitre cutting
work-piece using the mitre gauge.
To perform a miter cut using the cross cut fence:
1. Mount the cross cut fence onto the cross cut table.
2. Position the cross cut fence at the desired angle
and use the ratchet lever to lock the cross cut fence
in position.
3.Position the flip stop according to the length of the
workpiece you want to cut off to the left of the blade.
Note If the workpiece extends to the left of the saw
blade more than 1200mm, then the crosscut fence
slide needs to be extended.
4. Load the workpiece onto the table saw.
5. Mount the hold down arm onto the stud and lock the
work-piece in place.
6. Once all the necessary safety precautions have
been taken, perform the cutting operation.
To perform a miter cut using the hold down w/mitre
gauge:
1. Mount the hold down onto sliding panel and fit a cut
fence.
2. Position the hold down w/mitre gauge at the
desired angle and use the ratchet lever to lock the
mitre gauge in position.
3. Load the workpiece onto the sliding panel. Secure
the workpiece with clamp.
4. Once all the necessary safety precautions have
been taken, perform the cutting operation.
Advertisement
