Related Manuals for Advantech ADAM-4561
Summary of Contents for Advantech ADAM-4561
- Page 1 ADAM-4561 1-port Isolated USB to RS-232/422/485 Converter User’s Manual...
- Page 2 USB interface. By attaching the ADAM- 4561 to a PC, it will no longer be necessary to open the chassis or turn off the PC to install the hub. With the ADAM-4561, the user instantly gets one extra high-speed RS-232/422/485 ports. In addition, since the power is derived from the USB port, there are not any cumbersome power adapters.
- Page 3 • Storage Temperature: -25° to 80° C • Operating Humidity: 20% to 95% (non-condensing) • Storage Humidity: 0% to 95% (non-condensing) • ADAM-4561 • ADAM-4561 User’s Manual • Driver v1.00 disk • One Type A to Type B USB cable • NYLON DIN-rail Mounting Adapter •...
- Page 4 Traditional serial port communication uses a COM port board that slides into one of the slots at the back of your PC. With the ADAM- 4561, you can access the COM port from USB ports. The ADAM-4561 can be integrated into the network architecture of any protocol.
- Page 5 Data and RTS signals for RS-485 interface. Note: In USB v1.1 standard, If you have used the COM3, COM4….. COMn of host PC. When you plug ADAM-4561 in the host PC, the COM port will be COMn+1. ADAM-4561 User’s Manual...
- Page 6 Handshaking is unnecessary. If jumper JP1 is set to “On,” the driver is always enabled, and always in high or low status. The user must select a mode before beginning RS-422 applications. ADAM-4561 User's Manual...
- Page 7 4561, you must first have a host running Windows 98/ME/2000. Following are the installation instructions to set up the ADAM-4561. 1. Insert the ADAM-4561 Driver utility diskette into the floppy drive (e.g. A:\) on the host PC. 2. Use your Windows Explorer to e specify a default installation path C:\Control Panel/System/Device manager.
- Page 8 5. Click Finish button 6. If you want to check if the driver is installed or not, run Device manager. 7. Click it and you will see the detail information. ADAM-4561 User's Manual...