Philips iPlayer 3 User Manual page 33

Note: If you specify astronomical time, you also need to
specify both:
— The alarm hour and minute offset, which tells the iPlayer 3
when to fire a show with respect to a selected astronomical
event. For example, if you select
minutes, the alarm will fire two and one-half hours after
+30
sunrise, and if you select
one hour before sunset.
— Your latitude and longitude in order for the iPlayer 3 to
correctly calculate astronomical events. You do this via the
Setup Menu.
Note: The astronomical time alarm type does not
automatically make adjustments for daylight savings time.
You can configure up to 15 alarms. For example, to configure
alarm number 5 for every day at sunset:
1. Access Configuration Mode by pressing the right arrow
button on the iPlayer 3 faceplate.
2. Press the up or down arrow until the
selected, and then press the right arrow.
3. Press the up or down arrow to alarm number 5.
4. At the menu item, press the up or down arrow until
A D ?
LARM AYS
is selected and then press the right arrow to
E D
VERY AY
continue.
5. At the menu item, press the up or down arrow until
A T ?
LARM YPE
is selected, and then press the right arrow to
A
STRONOMICAL
continue.
6. Select the and the
S
UNRISE
press the right arrow to continue.
7. If you want to add an offset value (so that the show is
triggered a certain amount of time before or after sunrise or
sunset:
a. Enter an
A H
LARM
arrow
and offset =
S
UNRISE
and offset = -
S
UNSET
A
S S
UNRISE OR UNSET
value and then press the right
O
OUR FFSET
CONFIGURATION MODE
hours
+2
hour, it will fire
1
submenu is
LARM
menu item and then
?
33