If the programming is successful, the light illuminates at full
intensity after a few seconds. If the programming is not
successful, the light does not illuminate.
8. At the
Testing a DMX Address
To test the DMX address of light fixtures:
1. Access Configuration Mode by pressing the right arrow
button on the iPlayer 3 faceplate.
2. From the Configuration Mode main menu, select
3. Select
4. Specify the number of a light
If the test is successful, the light(s) illuminate at full intensity. If
the programming is not successful, the light(s) do not
illuminate.
Info Menu
The Info Menu contains:
• iPlayer 3 firmware version information.
• Memory usage / available memory. For example,
indicates 104KB used out of 1024KB available.
• Astronomical clock data (for example, the time of sunrise for
the current day).
prompt, press the right arrow. The iPlayer
T
DMX A
?
EST
DDR
3 performs a non-interactive test of the light you specified in
step 6 by setting the specified DMX address to FULL ON and
all other DMX address to OFF.
then press the right arrow.
, and then press the right arrow.
T
DMX A
EST
DDR
The iPlayer3 sends test data to any lights which are set to
that address.
CONFIGURATION MODE
) you want to test.
(1 through 170
, and
S
ETUP
104
/1024
K
K
36