Introduction To Iplayer 3 Modes - Philips iPlayer 3 User Manual

Introduction to iPlayer 3 Modes

The iPlayer 3 controller has three modes of operation:
• USB Mode. You use USB Mode to transfer data between the
• Run Mode. You use Run Mode to play light shows. See
• Configuration Mode. You use Configuration Mode to:
iPlayer 3 and ColorPlay 3 software on your PC or Mac. See
Setting Up the iPlayer 3 in USB Mode on page 14 and
Chapter : USB Mode on page 20.
3
Setting Up the iPlayer 3 in Run Mode on page 16 and
Chapter : Run Mode on page 23.
4
– Set up and display general information, such as date and
time, latitude and longitude (for sunrise/sunset
calculation), and firmware version number.
– Define or customize triggers and alarms.
See Setting Up the iPlayer 3 in Configuration Mode on page
17 and Chapter : Configuration Mode on page 26.
5
INTRODUCTION
10