Table of Contents
Advertisement
2WD FRONT AXLE ADJUSTMENT
In order to prevent interference with mounted equipment, the front axle on a
2WD T6000 tractor will have to be adjusted outwards by 2 holes on each side (see
illustration below). Double check the wheel spacing after adjustment by oscillating
and turning the tires fully to check for interference.
4WD FRONT TIRE ADJUSTMENT
In order to prevent interference with mounted equipment, the front wheels on a
4WD T6000 tractor will have to be adjusted to approximately 68" center to center
distance as shown below. Please refer to your John Deere Maintenance Manual to see
the correct rim and tire configuration to achieve this. Double check the wheel spacing
after adjustment by oscillating and turning the tires fully to check for any interference.
ASSEMBLY
Assembly Section 2-31
Advertisement
Table of Contents
