Table of Contents
Advertisement
SWITCH BOX MOUNTING (JOYSTICK)
Locate the 2 holes in the right front corner of the cab frame. These will be the
mounting holes for the 2 mounting bolts of the switch box bracket. Mount the bracket
using the hardware supplied, as noted in the parts section.
*NOTE ON HUSCO CONTROL VALVES*
Manual, cable controlled (Husco control valve) boom mowers require check valves
with integral restricting orifice (#06502036) installed in the control valve work ports that
are connected to the gland ends of the main and secondary boom cylinders. This
check valve allows oil to free flow into the gland end of the main and secondary boom
cylinders, but restricts flow out of the cylinder, thereby providing proper boom control.
This check valve, #06502036 is similar in appearance to hose adapter #33271. These
components can be identified as follows, and are to be installed per parts section for
the lift valve.
ASSEMBLY
Assembly Section 2-9
Advertisement
Table of Contents
