Wake On Lan - Draytek Vigor2710 Series User Manual

Enable IGMP Proxy
Enable IGMP Snooping
Group ID
P1 to P4
Refresh
If you check Enable IGMP Proxy, all the multicast groups will be listed and all the LAN
ports (P1 to P4) are available for use.
4 . 8 . 5 W a k e o
4 . 8 . 5 W a k e o
A PC client on LAN can be woken up by the router it connects. When a user wants to wake
up a specified PC through the router, he/she must type correct MAC address of the specified
PC on this web page of Wake on LAN of this router.
In addition, such PC must have installed a network card supporting WOL function. By the
way, WOL function must be set as "Enable" on the BIOS setting.
Wake by
IP Address
MAC Address
Vigor2710 Series User's Guide
n L A N
n L A N
Check this box to enable this function. The application of
multicast will be executed through WAN port.
Check this box to enable this function. Multicast traffic will
be forwarded to ports that have members of that group.
Disabling IGMP snooping will make multicast traffic treated
in the same manner as broadcast traffic.
This field displays the ID port for the multicast group. The
available range for IGMP starts from 224.0.0.0 to
239.255.255.254.
It indicates the LAN port used for the multicast group.
Click this link to renew the working multicast group status.
Two types provide for you to wake up the binded IP. If you
choose Wake by MAC Address, you have to type the correct
MAC address of the host in MAC Address boxes. If you
choose Wake by IP Address, you have to choose the correct IP
address.
The IP addresses that have been configured in
Firewall>>Bind IP to MAC will be shown in this drop down
list. Choose the IP address from the drop down list that you
want to wake up.
Type any one of the MAC address of the binded PCs.
139