Draytek Vigor2710 Series User Manual page 87

Encapsulation
WAN link for Channel 3, 4, 5 are provided for router-borne application such as TR069 and
VoIP. The settings must be applied and obtained from your ISP. For your special request,
please contact with your ISP and then click WAN link of Channel 3, 4 or 5 to configure your
router.
WAN for
Router-borne
Application
Enable/Disable
DSL Modem Settings
Vigor2710 Series User's Guide
Choose a proper type for this channel. The types will be different
according to the protocol setting that you choose.
Choose the router service for channel 3, 4 or 5.
Management - It can be specified for general management (Web
configuration/telnet/TR069). If you choose Management, the
configuration for this PVC will be effective for Web
configuration/telnet/TR069.
VoIP - It can be specified for VoIP only. If you choose VoIP, the
configuration for this PVC will be effective for VoIP data
transmitting and receiving.
Click Enable for activating this function. If you click Disable, this
function will be closed and all the settings that you adjusted in this
page will be invalid.
Set up the DSL parameters required by your ISP. These are vital
for building DSL connection to your ISP.
VPI - Type in the value provided by ISP.
79