Draytek Vigor2710 Series User Manual page 184

same time. That is, the wireless client must support this
feature and invoke the function, too.
Note: Vigor N61 wireless adapter supports this function.
Therefore, you can use and install it into your PC for
matching with Packet-OVERDRIVE (refer to the
following picture of Vigor N61 wireless utility window,
choose Enable for TxBURST on the tab of Option).
Rate Control It controls the data transmission rate
through wireless connection.
Upload – Check Enable and type the transmitting rate for
data upload. Default value is 30,000 kbps.
Download – Type the transmitting rate for data
download. Default value is 30,000 kbps.
176 Vigor2710 Series User's Guide