Bind Ip To Mac - Draytek Vigor2710 Series User Manual

4 . 2 . 4 B i n d I P
4 . 2 . 4 B i n d I P
This function is used to bind the IP and MAC address in LAN to have a strengthening
control in network. When this function is enabled, all the assigned IP and MAC address
binding together cannot be changed. If you modified the binding IP or MAC address, it
might cause you not access into the Internet.
Click LAN and click Bind IP to MAC to open the setup page.
Enable
Disable
Strict Bind
ARP Table
Add and Edit
Refresh
IP Bind List
Add
Vigor2710 Series User's Guide
t o M A C
t o M A C
Click this radio button to invoke this function. However, IP/MAC
which is not listed in IP Bind List also can connect to Internet.
Click this radio button to disable this function. All the settings on
this page will be invalid.
Click this radio button to block the connection of the IP/MAC
which is not listed in IP Bind List.
This table is the LAN ARP table of this router. The information
for IP and MAC will be displayed in this field. Each pair of IP
and MAC address listed in ARP table can be selected and added
to IP Bind List by clicking Add below
IP Address – Type the IP address that will be used for the
specified MAC address.
Mac Address – Type the MAC address that is used to bind with
the assigned IP address.
It is used to refresh the ARP table. When there is one new PC
added to the LAN, you can click this link to obtain the newly
ARP table information.
It displays a list for the IP bind to MAC information.
It allows you to add the one you choose from the ARP table or
the IP/MAC address typed in Add and Edit to the table of IP
Bind List.
87
.