Policy
MAC Address Filter
Attribute
Add
Delete
Edit
Cancel
OK
Clear All
Select to enable any one of the following policy. Choose
Activate MAC address filter to type in the MAC
addresses for other clients in the network manually.
Choose Isolate WLAN from LAN will separate all the
WLAN stations from LAN based on the MAC Address
list.
Display all MAC addresses that are edited before. Four
buttons (Add, Remove,
Client's MAC Address
address of wireless client.
s - select to isolate the wireless connection of the wireless
client of the MAC address from LAN.
Add a new MAC address into the list.
Delete the selected MAC address in the list.
Edit the selected MAC address in the list.
Give up the access control set up.
Click it to save the access control list.
Clean all entries in the MAC address list.
66
Manually enter the MAC
-
Vigor2710 Series User's Guide