Security - Draytek Vigor2710 Series User Manual

3 . 6 . 3 S e c u r i t y
3 . 6 . 3 S e c u r i t y
By clicking the Security Settings, a new web page will appear so that you could configure
the settings of WEP and WPA.
Mode
WPA
with 128 bit sync field. However, some original 11b
wireless network devices only support long preamble.
Check it to use Long Preamble if needed to
communicate with this kind of devices.
There are several modes provided for you to choose.
Disable - Turn off the encryption mechanism.
WEP-Accepts only WEP clients and the encryption key
should be entered in WEP Key.
WPA/PSK-Accepts only WPA clients and the encryption
key should be entered in PSK.
WPA2/PSK-Accepts only WPA2 clients and the
encryption key should be entered in PSK.
Mixed (WPA+ WPA2)/PSK - Accepts WPA and WPA2
clients simultaneously and the encryption key should be
entered in PSK.
The WPA encrypts each frame transmitted from the radio
using the key, which either PSK (Pre-Shared Key)
entered manually in this field below or automatically
64 Vigor2710 Series User's Guide