General Setup - Draytek Vigor2710 Series User Manual

4 . 2 . 2 G e n e r a l S e
4 . 2 . 2 G e n e r a l S e
This page provides you the general settings for LAN.
Click LAN to open the LAN settings page and choose General Setup.
1st IP Address
1st Subnet Mask
DHCP Server
Configuration
t u p
t u p
Type in private IP address for connecting to a local private network
(Default: 192.168.1.1).
Type in an address code that determines the size of the network.
(Default: 255.255.255.0/ 24)
DHCP stands for Dynamic Host Configuration Protocol. The
router by factory default acts a DHCP server for your network so
it automatically dispatch related IP settings to any local user
configured as a DHCP client. It is highly recommended that you
leave the router enabled as a DHCP server if you do not have a
DHCP server for your network.
84 Vigor2710 Series User's Guide