Rear Tail/Stop, Turn Signal And Backup Lamps - RAM TRUCK 1500 2014 Owner's Manual

Rear Tail/Stop, Turn Signal And Backup Lamps

1. Remove the two screws that pass through the bed
sheetmetal.
Tail Lamp Screw Locations
MAINTAINING YOUR VEHICLE 735
2. Pull the outboard side of the lamp rearward far
enough to unsnap the two receptacles on the outboard
side of the lamp housing from the two plastic snap
post retainers in the outer box side panel.
Pulling Out The Tail Lamp
3. Disconnect the wiring harness connectors from the
bulb socket.
7