RAM TRUCK 1500 2014 Owner's Manual page 253

Divider Position
The divider position is intended for managing your cargo
and assisting in keeping cargo from moving around the
bed. There are 11 divider slots along the bed inner panels
which allow for various positions to assist in managing
your cargo.
To install the bed extender into a divider position per-
form the following:
1. Make sure the center handle is unlocked using the
vehicle key and rotate the center handle vertically to
release the extender side gates.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 251
Center Handle And Lock
1 — Center Handle Lock
2 — Handle
2. With the side gates open, position the extender so the
outboard ends align with the intended slots in the
sides of the bed.
3