Automatic High Beam Headlamp Control - If Equipped - RAM TRUCK 1500 2014 Owner's Manual

Headlight delay can be cancelled by either turning the
headlight switch on then off, or by turning the ignition
ON.
The headlight delay time is programmable on vehicles
equipped with an Electronic Vehicle Information Center
(EVIC) or a Uconnect® system screen. Refer to "Elec-
tronic Vehicle Information Center (EVIC)/Customer-
Programmable Features" or "Customer- Programmable
Features — Uconnect® Access 8.4 Settings" in "Under-
standing Your Instrument Panel" for further information.
Automatic High Beam Headlamp Control — If
Equipped
The Automatic High Beam Headlamp Control system
provides increased forward lighting at night by automat-
ing high beam control through the use of a digital camera
mounted on the inside rearview mirror. This camera
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165
detects vehicle specific light and automatically switches
from high beams to low beams until the approaching
vehicle is out of view.
NOTE:
• Automatic High Beam Headlamp Control can be
turned on or off using the Uconnect® System, refer to
"Uconnect® Settings" in "Understanding Your Instru-
ment Panel" for further information.
• Broken, muddy, or obstructed headlights and taillights
of vehicles in the field of view will cause headlights to
remain on longer (closer to the vehicle). Also, dirt, film,
and other obstructions on the windshield or camera
lens will cause the system to function improperly.
If the windshield or Automatic High Beam Headlamp
Control mirror is replaced, the mirror must be re-aimed
to ensure proper performance. See your local authorized
dealer.
3