RAM TRUCK 1500 2014 Owner's Manual page 314

312 UNDERSTANDING YOUR INSTRUMENT PANEL
5. Press and release the DOWN
select "Yes", then press and release the Right arrow
button to select reset of the Fuel Filter Life.
6. Press and release the Up
EVIC screen.
Vehicles Not Equipped With Passive Entry
1. Without pressing the brake pedal, cycle the ignition to
the ON/RUN position (Do not start the engine.)
2. Press and release the DOWN
scroll downward through the main menu to "Vehicle
Info".
3. Press and release the RIGHT arrow button
to access the "Fuel Filter Life" screen.
arrow button to
arrow button to exit the
arrow button to
4. Press and hold the RIGHT arrow button for
one second to access the "Fuel Filter Life
Reset" screen.
5. Press and release the DOWN
select "Yes", then press and release the Right arrow
button to select reset of the Fuel Filter Life.
6. Press and release the Up
EVIC screen.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
Oil Life Reset
Your vehicle is equipped with an engine oil change
indicator system. The "Oil Change Required" message
will flash in the EVIC display for approximately 10
seconds after a single chime has sounded, to indicate the
next scheduled oil change interval. The engine oil change
arrow button to
arrow button to exit the