RAM TRUCK 1500 2014 Owner's Manual page 304

302 UNDERSTANDING YOUR INSTRUMENT PANEL
Press and release the DOWN
"Reset", then press and release the Right arrow
button to select reset of the Fuel Filter Life to
100%.
Press and release the Up
EVIC screen.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
Oil Life Reset
Your vehicle is equipped with an engine oil change
indicator system. The "Oil Change Required" message
will flash in the EVIC display for approximately 10
seconds after a single chime has sounded, to indicate the
next scheduled oil change interval. The engine oil change
arrow button to select
arrow button to exit the
indicator system is duty cycle based, which means the
engine oil change interval may fluctuate, dependent
upon your personal driving style.
Vehicles Equipped With Passive Entry
1. Without pressing the brake pedal, press the ENGINE
START/STOP button and cycle the ignition to the
ON/RUN position (Do not start the engine.)
2. Press and release the DOWN
scroll downward through the main menu to "Vehicle
Info".
3. Press and release the RIGHT arrow button
to access the "Oil Life" screen.
arrow button to