Programming The Memory Feature - RAM TRUCK 1500 2014 Owner's Manual

The memory seat buttons are located on the outboard
side of the drivers seat cushion.
Memory Seat Buttons
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157

Programming The Memory Feature

NOTE: To create a new memory profile, perform the
following:
Vehicles Equipped With Keyless Enter-N-Go
1. Without pressing the brake pedal, push the ENGINE
START/STOP button and cycle the ignition to the
ON/RUN position (do not start the engine).
2. Adjust all memory profile settings to desired prefer-
ences (seat, side mirrors, adjustable pedals and radio
station presets).
3. Press and release the S (Set) button on the memory
switch.
4. Within five seconds, press and release either of the
memory buttons (1) or (2). The Electronic Vehicle
Information Center (EVIC) will display which
memory position has been set.
3