Programming The Memory Feature - RAM CHASSIS CAB 2015 Owner's Manual

The memory seat buttons are located on the outboard
side of the drivers seat cushion.
Memory Seat Buttons
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141

Programming The Memory Feature

NOTE: To create a new memory profile, perform the
following:
1. Cycle the vehicles ignition to the ON/RUN position
(do not start the engine).
2. Adjust all memory profile settings to desired prefer-
ences (seat, side mirrors, adjustable pedals and radio
station presets).
3. Push and release the S (Set) button on the memory
switch.
4. Within five seconds, push and release either of the
memory buttons (1) or (2). The Electronic Vehicle
Information Center (EVIC) or Driver Information Dis-
play (DID) will display which memory position has
been set.
3