Install Driver In An Existing System - Promise Technology FastTrak SX4100 User Manual

Promise technology fasttrak sx4100 user manual
Hide thumbs Also See for FastTrak SX4100:
Table of Contents

Advertisement

FastTrak SX4100 User Manual
3.
When the boot: prompt appears on the bottom of the screen, type
acpi=oldboot into the lower input box.
4.
Press the left Alt key and insert the FastTrak driver diskette into the floppy
drive.
5.
Finish the installation normally.

Install Driver in an Existing System

1.
Insert the FastTrak driver diskette into the floppy drive.
2.
Type the following commands:
# mount /dev/fd0 /media /floppy
# cd /media /floppy
# ./install
# insmod FastTrak
# umount /media /floppy
3.
Remove the FastTrak driver diskette from the floppy drive.
32

Advertisement

Table of Contents
loading

Table of Contents