Figure C.13: Ip Configuration—Dhcp; Figure C.14: Ip Configuration—Auto Range - Advantech EKI-7659C Owner's Manual

default IP address will be replaced by the assigned IP address from DHCP server.
After user click "Apply" button, a popup dialog shows up to ask user entering user
name and password.
Figure C.13: IP Configuration—DHCP
• Auto Range: When the Method is selected as Auto Range, you can fill in the IP
addresses for IP Begin, IP End, Subnet Mask, Gateway, DNS Server1 and DNS
Server2 column fields to assign a range of IP addresses. Or you can press the small
square button to load discovery filter to be a range. Press the 'Set' button to carry the
setting into effect, and then the device will get an IP address from this assigned
range.
Figure C.14: IP Configuration—Auto range
99