First Use; Accessories Connection; Router Configuration - Advantech ICR-4401 Hardware Manual

3. First Use

3.1 Accessories Connection

Before putting the router into operation, make sure to connect all the components required for running
your applications. Refer to Chapter

3.2 Router Configuration

You can perform the initial configuration of the router using a web browser on your PC. This interface
allows for router monitoring, configuration, and administration.
Begin by connecting the power supply to the router (refer to Chapter 2.5). The router will initiate its boot
process. Ensure your PC is configured to obtain IP settings automatically from the network. Connect your
PC's network card to the default LAN interface of the router, Ethernet port ETH0. The DHCP server will
assign an IP address to your PC.
To access the router's web interface, enter the following address in your web browser:
1.1
. Please note that using the HTTPS protocol for secure communication over the network is mandatory.
There is just the root user account created on the router by default. Check the product label on
the router for the default password
corresponding password. Successful login grants access to the router's web interface. Consult the router
Configuration Manual
After logging on to the device for the first time, we strongly recommend changing the default password
due to security reasons.
For security reasons, we recommend regularly updating the router's firmware to the latest version.
Downgrading the firmware to an older version than the production version or uploading firmware
intended for a different device may cause the device's malfunction.
All routers have the WebAccess/DMP client pre-installed by default. The activated client periodically
uploads router identifiers and configuration to the WebAccess/DMP server. See the configuration
manual [1], chapter Basic Information
If the router's label lacks a unique password, use the password root .
1
ICR-4401 Hardware Manual
1.2 for an overview of the hardware.
Access the web interface by logging in with the root user and the
1
[1] for detailed descriptions and examples of router configuration.
WebAccess/DMP Configuration, for more information.
https://192.168.
25