Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
UTILITY STITCHES
■ Using the quilting guide
Use the quilting guide to sew parallel stitches that
are equally spaced.
Insert the stem of the quilting guide into the
a
hole at the rear of the walking foot or presser
foot holder.
Walking foot
Presser foot holder
Adjust the stem of the quilting guide so that
b
the guide aligns with the seam that has already
been sewn.
110
Free-motion quilting
With free-motion quilting, lower the feed dogs (using
the drop feed lever) so that the fabric can be moved
freely in any direction.
When free-motion quilting, use the following
instructions with the quilting foot.
Note
Thread the needle manually when using the
quilting foot, or only attach the quilting foot after
threading the needle using the needle threader.
a
Remove the presser foot and the presser foot
holder.
• Refer to "Removing and attaching the presser
foot holder" (page 46).
b
Secure the quilting foot with the presser foot
holder screw.
The pin on the quilting foot should be
positioned over the needle clamp screw.
2
a Pin on quilting foot
b Presser foot holder screw
c Needle clamp screw
c
Hold the quilting foot in place with your right
hand, and then tighten the presser foot holder
screw using the screwdriver in your left hand.
1
a Presser foot holder screw
1
3
Advertisement
Table of Contents
