Chapter 6 Error Display And Recovery; Error Display; Temporary Error; Alarm - Fujitsu M3097DG Oem Manual

Chapter 6 Error display and Recovery

6.1

Error display

6.1.1

Temporary error

(1) Hopper empty
Paper Empty
(2) Jam
Paper Jam
(3) ADF cover open
ADF-Cover Open
(4) Double feed error
Double Feed Error
NOTICE:
NOTICE:
6.1.2

Alarm

One of the following message is displayed if an error occurs in the scanner. If one of the following
error message is displayed, turn the power off and then on again. If the same message is displayed,
contact your service representative.
(1) Optical alarm front
Optical Alarm(F)
(2) Optical alarm back
Optical Alarm(B)
The scanner stores the length of the first sheet. And scanner compares the length of
scanned document with first sheet.
document is longer than the first sheet. So each sheet length of the document must
be same.
The scanner can not detect the Double feed error when the documents completely
overlap each other.
This message is displayed if there is no more paper on
the ADF paper chute during a read operation in ADF
mode. Fill the ADF paper chute with paper. To enable
the read operation, press the stop button
This message is displayed if a document is jammed in
the ADF. See section 6.2 for removing jammed
documents.
This message is displayed if the ADF is not closed
completely. Close the ADF completely, and enable
the read operation.
This message is displayed when the ADF detects the
Double feed error. Check the document and re-scan
the document.
Double feed is detected when the scanned
6-1